15KW EV charger module used for CCS2 and CHAdeMO EV charger

15KW 750V Charger Power Module:

Main Feature:

*Inside high frequency transformer isolation

*Full hot plug design

*High efficiency over the full load range, full load efficiency higher than 95.5%

*Wide output voltage range, 150-750Vdc, suitable for a wide range of EVs

*Constant current for higher output power at low output voltage

*An internal patented intelligent discharge circuit automatically discharges residual charge, simplifying system designs

*Low standby power consumption, less than 9W

*3 Phase without neutral elinates the risk of high neutral currents

*3 Phase active power factor correction technology, reduces the harmonic interference to the grid

* Dual DSP design, provides the full digital control, less componets means higher reliability

*Wide input voltage range, 260-530Vac, allows oparation in most poor grid conditions

*Wide operating temperature range, -40°C~+75°C

Product Detail

Production Parameters Model :15KW Environmental Ambient Temperature :-40°C~+75°C,derating from 55°C Storage Tem : -40°C~+75°C Humidty :≤95%RH, non-condensing Cooling :Fan cooling Altitude 2000m Input Side Frequency Range 45-65Hz Input Voltage Range 3L+PE, 260Vac-530Vac Power Factor 0.99 Max. Input Current 30A ITHD(Total harmonic Distortion) ≤5% Efficiency(top) ≥94%,@750Vdc/50%-100% Load current,Max point ≥95.5% Output Side Output Power 15KW@Voltage>600Vdc Voltage Range 150Vdc~750Vdc Current Range 0~25A Current Sharing <+/-0.5A Voltage Stabilized Accuracy <+/-0.5% Current Stabilized Accuracy ≤+/-1%(Output power in 20%~100%) Control Communication CAN bus, Max 48 power modules parallel Indication light Green LED: normal operation Yellow LED: alarm Red LED: failure Address Indication Automatic address identification, Panel dial switch for group setting