Best price DC 7KW Portable EV Charger with CCS Chademo Plug
Short Description:
Product Description
7KW portable fast EV charger
|
Model
|
7kW
|
|
AC Input
|
Input Rating |
220Vac± 15% |
| AC Input Connection |
L2+L3+PE (NEMA) |
| Max. Input Current |
32A
|
| Frequency |
50/60 Hz |
| Power Factor |
>0.99 @ full load |
| Efficiency |
95% |
|
DC Output
|
Output Voltage Range |
50~500Vdc (CHAdeMO), 200~750Vdc (CCS), 150~450Vdc(GB/T) |
| Max.Output Power |
7kW |
| Max.Output Current |
20A@350V, 9A@750V |
|
User Interface
|
TFT-LCD Touch Panel |
LED |
| Push Buttons |
Sta rt/Stop |
| Interface |
USB |
| Packing |
Dimension |
450*240*180mm |
| Weight |
20kg |
|
Environment
|
Operating Temperature
|
-20°C ~ +50°C, power derating from +50°C and above |
| Humidity |
5% ~ 90% RH, non-condensing |
| Altitude
IP Level |
2000m
IP23 |
| Mechanical |
Cable Length |
5M (CHAdeMO), 5M (CCS), 5M(GB/T) Customized acceptable |
|
Regulation
|
Regulation |
IEC62196-3 |
| Certification |
CE,ROHS |
| Charging protocol |
CHAdeMO 2.0/DIN 70121 |
Operate Condition and requirement for 7KW portable EV charger
Working condition
1) Prevent the rain, water, avoid direct sunlight ,away from the sources of
charger,such us fire source, combustible gas,rain,snow smoke,sand-dust
ect.
2) Operating temperature:-20℃~45℃
3) Operating humidity:5%~95%
4) Operating altitude:<=2000m
7KW high efficiency 96% series charging pile power module with the latest power supply,technology and craftsmanship, specifically designed for charging new energy vehicles.
1.Active power rate factor correction, high efficiency, high power density, high reliability, intelligent control and features such as beautiful appearance;
2.The module uses forced air cooling to dissipate heat, power density high, small footprint; with hot swap and reverse battery protection, group screen,
Function and Features for 7KW portable EV charger
1)The communication board has the high-speed CAN net work can communicate with BMS of the electric car and complete the charger charge control.It used to judge the power battery type of the electric car and obtains the systematic parameter and also obtains the status data of the power battery’s voltage,current and temperature in the course of charging and before charging.
2)4.3 inches LCD touch screen display with indicator function,which can real-time display the remaining battery power,charging voltage charging current,remaining charging time and the charger’s failure state.
3)Two buttons complete charge (on/off)can change and set up the charger’s parameter.Please refer to the seventh part of the manual (Human-computer interaction)
4)The charger equipped with emergency stop system,it can cut off the output current at the first time in an emergency.Please check 2-1for reference.
5)The air switch can cut off the AC input.Please check 2-1 for reference.
6)The connect between AC input charger connector and DC output charger are detachable connector.The user can put the input cable and output cable stored separately.
7)The Charger can filling the electricity 10 ~ 15 kw/H per hour commonly,general cars can be recharged in 1.5~ 2 hours and the bus need 4~5.5 hours.
8)Please notice that the air duct can not toward to ground or be blocked.As the figure 6-1 for reference.
