Purpose of use
The coil is used for the transmission of wires from far and near distance. This
product is only used indoors
Note: the equipment can not be used for the transmission of oil and
various chemical reagents
Hazard warning
Location and content of warning label
When installing the wire type coil, please operate in
accordance with the safety matters specified in the operation
manual.
If the installation instruction manual is missing or warning
labels are peeling off or dirty, please contact the seller.
The wire type coil is labeled with the warning label shown in
the left figure. Please confirm whether it is.
Structure and name of various parts of winder How to use it
When charging the new energy electric vehicle, the user pulls out the charging gun and
goes to the charging interface of the vehicle. At this time, because the wire clamping ball
of the winder clamps the gun wire, the user gently pulls the traction rope of the winder.
When the gun wire reaches the required length, the user only needs to pause for a
moment. The automatic locking device of the winder immediately works and locks the
traction rope. The user inserts the charging gun to start charging, After pulling out the
charging pile from the vehicle, the user gently pulls on the charging gun. At this time, the
automatic locking device of the winder immediately works and unlocks the traction rope.
The traction rope is automatically recovered under the action of the power spring of the
winder, and the wire clip ball and the gun wire are recovered to the outlet of the winder
(that is, the top of the charging pile column, the middle of the gun wire and the top of the
column, The gun wires at both ends are in free hanging state, and the charging gun is
inserted into the reset position, so that a work cycle process ends.)

Repair requirements
In the warranty period, and in full compliance with the installation instructions, labels on the
precautions for operation, the company has the responsibility to repair free of charge. Exchange
parts and send replacement parts.
However, the failure under the following circumstances does not fall within the scope of
warranty.
1. Failure and damage due to improper use, negligence in inspection and storage
2. Due to random changes, the structure of the product will have adverse effects, and some
failures and damages will occur
3. The consumables need to be replaced due to natural wear and tear.
4. Faults and damages caused by fire, earthquake, wind, flood and other external causes that
cannot be resisted;
5. Failure and damage caused by using non specified parts;